User's Manual Part 1

Quick Start Guide Installation and Operation Manual
 On the front panel of the IDU-C
2. Connect user hub/router or any other compatible device to the IDU
RJ-45 port designated LAN.
 On the rear panel of the IDU-E
 On the front panel of the IDU-C
Æ
To connect user equipment to the O-PoE:
1. Connect user hub/router or any other compatible device to the port
designated ETH via an outdoor shielded CAT-5e cable. To connect
directly to PC LAN port, refer to
Appendix A.
• IDU-C has an integrated LAN switch that provides two 10/100BaseT
ports. The Integrated LAN switch does not support spanning tree.
Note
• The two LAN por s can be connected to two separate LAN segments. t
Cau ion t
tCau ion
Do not connect both LAN ports to the same LAN segment, a loop will
be created that will flood the network.
For O-PoE only UL Listed parts and components are used for
installation. Use UL listed devices having an environmental rating equal
to or better than the enclosure rating to close all unfilled openings.
8 Connecting the User Equipment WinLink 1000