User Manual

Chapter 3 Configuration AirMux-200 Installation and Operation Manual
3-6 Performing Configuration of AirMux-200
§ E1/T1 – Select the E1/T1 field, if you intend to transmit E1/T1
data and Ethernet data (see Figure 3-5).
The Ethernet BW field shows the remaining bandwidth in Mbps
available for Ethernet. The available bandwidth depends on the
number of E1/T1 ports selected.
§ Select the Ethernet field, if you intend to transmit Ethernet data
only
(see Figure 3-6)
2. Click Next.
The Finish screen appears (see Figure 3-7).
The Finish screen shows a summary of the link configuration.
3. Click Finish to complete the configuration wizard.
Figure 3-5. Service Parameters Dialog Box, E1 Interface
Inventory