User Manual

AirMux-200 Installation and Operation Manual Chapter 3 Configuration
Performing Configuration of AirMux-200 3-5
5 5820 MHz –
6 5840 MHz –
Manual User defined channel, within frequency band
8. Click Next.
The Rate Select dialog box appears (see Figure 3-4)
Table 1-1 lists throughput rates and capacities.
Figure 3-4. Rate select Dialog Box
9. Click Next.
The Service Parameters dialog box appears (see Figure 3-5 and
Figure 3-6).
Configuring Service Parameters
In the Service Parameters dialog box configure E1/T1 (x1 or x2) and
Ethernet parameters.
ä
To configure E1/T1 and Ethernet:
1. In the Service dialog box, select one of the following: