User Manual

Chapter 3 Configuration AirMux-200 Installation and Operation Manual
3-4 Performing Configuration of AirMux-200
§ SSID – System ID. This number is initially factory set. It can be
user defined, but both local and remote sites must have the
same number.
§ Link name – enter a name for the link identification.
§ Site 1 – enter location name of site 1
§ Site 2 – enter location name of site 2
6. Click Next.
The Channel Select dialog box appears (see Figure 3-3)
7. Select the required operating channel.
Table 3-1 lists channels and frequencies for ISM and UNII bands.
Figure 3-3. Channel select Dialog Box
Table 3-1. AirMux-200 Channels and Frequencies
Channel ISM Band UNII Band
1 5740 MHz 5740 MHz
2 5760 MHz 5760 MHz
3 5780 MHz 5780 MHz
4 5800 MHz 5800 MHz