User Manual

AirMux-200 Installation and Operation Manual Chapter 3 Configuration
Performing Configuration of AirMux-200 3-3
Configuring General Parameters
In order to establish a link between the manager station and AirMux-
200 you must configure the link channel and rate parameters.
ä
To change general parameters:
1. In the Main menu, click Configure Link.
2. The Configuration Wizard opens.
The wizard is used to install a link or make configuration
changes.
When the SSID or Channel fields are changed, the link is reset.
All changes made in the wizard are reflected in the Link Quality
monitor pane.
3. Click Next.
4. The General Parameters dialog box appears (see Figure 3-2).
Figure 3-2. General Parameters Dialog Box
5. From the General Parameters dialog box, enter data to describe the
link:
Note