User Manual

Chapter 2 Installation and Setup AirMux-200 Installation and Operation Manual
2-6 Installation and Setup
Do not stand in front of a live radio terminal.
2. Turn the local ODU in the direction of the remote ODU.
3. At the remote site, turn the ODU to face the local ODU. (Align
visually or by using a map and a compass). Use the DVM-tool or
Buzzer indication on the ODU to verify link quality (see Figure 2-3).
4. Repeat step 3 for the local ODU to complete the installation
procedure.
5. Slowly adjust the ODU at both sites until you hear the Best Signal
sound.
Buzzer Sequence
=buzzer on
=buzzer off
Description
Radio is on but no radio link
to the remote side
Best Signal so far
Signal better than the last
second
Signal same as the last second
Signal worse than the last
second
Figure 2-3. Buzzer Sequence for ODU Alignment
Warning