User Manual

Chapter 2 Installation and Setup AirMux-200 Installation and Operation Manual
2-2 Installation and Setup
2.2 Site Requirements and Prerequisites
For the IDU, allow at least 90 cm (36 in) of frontal clearance for
operating and maintenance accessibility. Allow at least 10 cm (4 in)
clearance at the rear of the unit for signal lines and interface cables.
The ambient operating temperature should be –45 to 60°C/-49 to
140°F (ODU), or -5 to 45°C/23 to 113°F (IDU) at a relative humidity of
up to 90%, non-condensing.
2.3 Package Contents
The AirMux-200 package includes the following items:
• ODU (Outdoor Unit)
• IDU (Indoor Unit)
• ODU cable pre-cut to length ordered
• Two spare RJ-45 connectors
• AC/DC power converter
• AirMux Manager installation CD
• Technical documentation CD
• ODU mounting kit
• External antenna (if ordered)
2.4 Installation and Setup
Physical installation of the AirMux-200 system includes the following
steps:
1. Installing management program on the network management
station.
¨ Selecting IP address, subnet mask, default gateway and trap
destination.