User Manual

Always make sure that the equipment is grounded before connecting telecommunication
cables. Do not disconnect the ground connection before disconnecting all
telecommunications cables.
Some SELV and non-SELV circuits use the same connectors. Use caution when
connecting cables. Extra caution should be exercised during thunderstorms.
When using shielded or coaxial cables, verify that there is a good ground connection at
both ends. The earthing and bonding of the ground connections should comply with the
local codes.
The telecommunication wiring in the building may be damaged or present a fire hazard
in case of contact between exposed external wires and the AC power lines. In order to
reduce the risk, there are restrictions on the diameter of wires in the telecom cables,
between the equipment and the mating connectors.