Reference Guide

5250 – 5350 MHz band – FCC Part 15 Subpart E, RSS 247
The maximum output power is set as follows, under FCC and ISED regulations. The power
values are for systems with 13 dBi antenna gain not exceeding the 30 dBm EIRP limit
20 MHz: 17.0 dBm
40 MHz: 17.0 dBm
80 MHz: 17.0 dBm
5470 – 5725 MHz band – FCC Part 15 Subpart E, RSS 247
The maximum output power is set as follows, under FCC and ISED regulations. The power
values are for systems with 13 dBi antenna gain not exceeding the 30 dBm EIRP limit
20 MHz: 17.0 dBm
40 MHz: 17.0 dBm
80 MHz: 17.0 dBm
Labelling Requirements
The assembly board is labeled with the identification numbers as follows:
FCC ID: Q3K-5XSUALMOD
IC: 5100A-5XSUALMOD
The host into which the assembly board is assembled is labeled as follows:
Contains FCC ID: Q3K-5XSUALMOD
Contains IC: 5100A-5XSUALMOD
Hosts Test Mode Configuration
Integration in various hosts requires power limitations per antenna assembly gain used with
the host to comply with the FCC/ISED requirements (5.15-5.25 GHz only for FCC)
Host
Antenna
Gain (dBi)
Max Output Power per Band
(dBm, GHz)
5.15-5.25
5.25-5.35
5.47-5.725
5.725-5.85
SU Connectorized and Alpha Connectorized
13
29.0
17.0
17.0
29.0
SU Connectorized and Alpha Connectorized
16
26.0
14.0
14.0
26.0
SU Integrated and Alpha Integrated
22
23.0
7.0
7.0
27.0
SU Connectorized and Alpha Connectorized
23
22.0
8.0
8.0
26.0
SU Connectorized and Alpha Connectorized
25
20.0
5.0
5.0
24.0
SU Connectorized and Alpha Connectorized
28
15.0
N/A
N/A
15.0
SU Connectorized and Alpha Connectorized
32
10.0
N/A
N/A
13.0
AP0263510/..30/..40 Reference Guide 3