Reference Guide

Overview
The AP0263510, AP0263530, AP0263540 is a 5 GHz assembly board operating in the 5.2,
5.3, 5.4 and 5.8 GHz frequency bands. It is a TDD OFDM radio supporting 10, 20 MHz, 40
MHz and 80 MHz channel bandwidths. It is a 2x2 MIMO transceiver.
The assembly board contains the power supply block, the CPU and peripheral block, the
Ethernet communication interface and the radio transceiver block on a single board. It is
installed in a host enclosure manufactured by RADWIN.
The 5 GHz assembly board is certified as a limited modular approval type under the FCC ID:
Q3K-5XSUALMOD. It is also certified under IC: 5100A-5XSUALMOD excluding the 5.2 GHz
band.
Condition of Use
The AP0263510, AP0263530, AP0263540 5 GHz assembly board is a proprietary radio
module manufactured by RADWIN. The module is not for sale to the general public or for
installation in hosts not manufactured by RADWIN.
FCC rules and ISED Regulation Restrictions
The host firmware is factory programmed to operate under the FCC rules and ISED
regulation restrictions. The firmware is locked and inaccessible by any third party. As a
result of the above the user interface allows both the installer and the user to control the
host only within the boundaries of the regional restrictions.
Part 15 Subpart B disclaimer
The AP0263510, AP0263530, AP0263540 5 GHz assembly board is only FCC authorized for
FCC rules Part 15E.
The final hosts into which the assembly boards have been installed were tested to Part 15
Subpart B.
The final hosts are:
1. SU Integrated
2. Alpha Integrated
3. SU Connectorized
4. Alpha Connectorized
AP0263510/..30/..40 Reference Guide 1