User's Manual

Overview
The ‘SU Pro, SU Air’ is an Outdoor Subscriber Radio Unit operating in the 4.9 – 5.8 GHz
frequency bands. It is a TDD OFDM radio supporting 10 MHz, 20 MHz, 40 MHz and 80 MHz
channel bandwidths. The 2.4 GHz WiFi interface supports standard 802.11/n HT-20, HT-40
operation modes.
The ‘SU Pro, SU Air’ supports cross polarized 2x2 MIMO antenna configuration for PtP and
PtMP systems. The ‘SU Pro, SU Air’ supports 2 RF connectors for interfacing external cross
polarized 2x2 MIMO antenna. The ‘SU Pro, SU Air’ also features an on-board WiFi 2.4 GHz
interface module for short range control purposes. The ‘SU Pro, SU Air’ is powered by a
24Vdc PoE device.
The ‘SU Pro, SU Air’ is certified with the FCC ID: Q3K-5XACULC-X and IC: 5100A-5XACULCX.
Condition of Use
The ‘SU Pro, SU Air’ is a proprietary radio device and can only be deployed and maintained
by RADWIN professional installers or its authorized subcontractors
FCC rules and IC Regulation Restrictions
The ODU firmware is factory programmed to operate under the FCC rules and Industry
Canada regulation restrictions. The firmware is locked and inaccessible by any third party.
As a result of the above the user interface allows both the installer and the user to control
the ODU only within the boundaries of the regional restrictions.
Antennas
The ‘SU Pro, SU Air’ is certified with a 17 dBi integrated flat crossed dual pole antenna type
and with a 23 dBi external antenna, both covering Point-to-Point and Point-to-Multipoint
operation configurations.
SU Pro, SU Air Reference Guide 1