SU Pro, SU Air Outdoor Subscriber Radio Unit REFERENCE GUIDE
Regulatory Compliance FCC/IC - Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and IC RSS standards. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Prudence Les unités extérieures et les antennes doivent être installés que par des professionnels expérimentés d'installation qui sont familiers avec les normes locales et les codes de sécurité et, si applicable, sont agréées par les autorités gouvernementales de réglementation compétents. Ne pas le faire peut annuler la garantie du produit et peuvent exposer l'utilisateur final ou le fournisseur de services d'obligations juridiques et financiers.
Overview The ‘SU Pro, SU Air’ is an Outdoor Subscriber Radio Unit operating in the 4.9 – 5.8 GHz frequency bands. It is a TDD OFDM radio supporting 10 MHz, 20 MHz, 40 MHz and 80 MHz channel bandwidths. The 2.4 GHz WiFi interface supports standard 802.11/n HT-20, HT-40 operation modes. The ‘SU Pro, SU Air’ supports cross polarized 2x2 MIMO antenna configuration for PtP and PtMP systems. The ‘SU Pro, SU Air’ supports 2 RF connectors for interfacing external cross polarized 2x2 MIMO antenna.
Certified Antenna Following are the antennas certified for use with the ‘SU Pro, SU Air’: Antenna Type Dual Pole Integrated Dual Pole External Omni Manufacturer RADWIN Ltd. RADWIN Ltd. RADWIN Ltd. Model Number Frequency Range Antenna Max Gain (dBi) 4940-4990 14 5150-5350 16 5470-5725 17 5725-5850 16 4940-4990 23 5150-5350 23 5470-5725 23 5725-5850 23 2400-2483.
2400 – 2483.5 MHz band - FCC/IC The maximum output power can be set as follows, when operating in the 2.4 GHz band, under FCC 47 CFR Part 15.247 and IC RSS-247 regulations. The power values are for Wi-Fi systems for HT-20 and HT-40 Channel BW. The highest conducted output power shall be limited to 26 dBm in all channel bandwidths 5250 – 5350 MHz band – FCC/IC The maximum output power can be set as follows, when operating in the 5.3 GHz band. The total EIRP limit is 30 dBm.
Radio parameters accessed by end-user The following parameters can be accessed by user: 1. Output Power 2. Frequency channel 3.
