Reference Guide

Antennas
Following is the list of antennas supported by the AP0260210 5 GHz MS RF Module:
Antenna Type
Manufacturer
Model Number
Antenna Max
Gain (dBi)
5.1
GHz
5.8
GHz
Sector Dual Pole Integrated 90 Deg
RADWIN
Integrated
14
16
Flat Panel Dual Pole Integrated
RADWIN
MT0105940
16
16.5
Sector Dual Pole 90 Deg External
RADWIN
RW-9061-5001
13
13
Sector Dual Pole 60 Deg External
RADWIN
RW-9061-5002
14
14
Sector Dual Pole 120 Deg External
RADWIN
RW-9061-5004
10
10
Sector Dual Pole 90 Deg External
RADWIN
RW-9061-5010
13
15
Flat Panel Dual Pole External
RADWIN
RW-9105-4958
15
15
Flat Panel Dual Pole External
RADWIN
RW-9105-5158
18
18
Flat Panel Dual Pole External
RADWIN
RW-9613-4960
22
22
Flat Panel Dual Pole External
RADWIN
RW-9622-5001
27
27
Dual Pole Dish
RADWIN
RW-9721-5158
27
27
Dual Pole Dish
RADWIN
RW-9732-4958
31
31
Maximum Output Power
5725 – 5850 MHz band – FCC Part 15 Subpart E, RSS 247
The maximum output power can be set as follows, when operating in the 5.8 GHz band,
under FCC and ISED regulations. The power values are for PtP systems with 10 dBi antenna
gain and PtMP systems with 15 dBi antenna gain. For PtMP systems the total EIRP is limited
to 36 dBm.
The highest conducted output power shall be limited to 30 dBm in all channel bandwidths
P-P
20 MHz: 29.0 dBm
40 MHz: 29.0 dBm
80 MHz: 29.0 dBm
P-MP
20 MHz: 26.0 dBm
40 MHz: 26.0 dBm
80 MHz: 26.0 dBm
5150 – 5250 MHz band – FCC Part 15 Subpart E
The maximum output power can be set as follows when transmitting in the 5.1 GHz band,
under FCC regulations.
The total EIRP limit for PtP applications is 53 dBm.
The total EIRP limit for PtMP applications is 36 dBm.
The total EIRP limit for PtMP applications when transmitting at elevations above 30° relative
to the horizon is 21 dBm.
P-P
20 MHz: 29.0 dBm
40 MHz: 29.0 dBm
80 MHz: 29.0 dBm
P-MP
20 MHz: 26.0 dBm
40 MHz: 26.0 dBm
80 MHz: 11.0 dBm
AP0260210 Reference Guide 2