Reference Guide

Overview
The AP0260210 is an RF module operating in the 5.1 and 5.8 GHz frequency bands. It is a
TDD OFDM radio supporting 20 MHz, 40 MHz and 80 MHz channel bandwidths. It is a 2x2
MIMO transceiver, with two RF interfaces capable of toggling between them.
The MS RF module cannot work as a stand-alone device. It can operate and be controlled
only when installed in a host enclosure manufactured by RADWIN.
The MS RF module is certified as a limited modular approval type under the FCC ID: Q3K-
5XACMODMS. It is also certified under IC: 5100A-5XACMODMS for 5.8 GHz band.
Condition of Use
The AP0260210 MS RF module is a proprietary radio interface and can only be connected to
digital boards manufactured by RADWIN. The MS RF module is not for sale to the general
public or for installation in hosts not manufactured by RADWIN.
FCC rules and ISED Regulation Restrictions
The host firmware is factory programmed to operate under the FCC rules and ISED
regulation restrictions. The firmware is locked and inaccessible by any third party. As a
result of the above the user interface allows both the installer and the user to control the
host only within the boundaries of the regional restrictions.
Antennas
The AP0260210 MS RF module is certified with a wide range of antenna types covering both
Point-to-Point and Point-to-Multipoint systems up to 31 dBi gain.
AP0260210 Reference Guide 1