Installation Guide

Table Of Contents

FinMInstallationGuide Release4.5.25 D‐5

SafetyPractices

ApplicablerequirementsofNationalElectricalCode(NEC),NFPA70;andtheNational

ElectricalSafetyCode,ANSI/IEEEC2,mustbeconsideredduringinstallation.

NOTES:

1.APrimaryProtectorisnotrequiredtoprotecttheexposedwiringaslongastheexposed

wiringlengthislimitedtolessthanorequalto140feet,andinstructionsareprovidedto

avoidexposureofwiringtoaccidentalcontactwithlightningandpowerconductorsin

accordancewithNECSections725‐54(c)and800‐30.

Inallothercases,anappropriateListedPrimaryProtectormustbeprovided.RefertoArticles

800and810oftheNECfordetails.

2.ForprotectionofODUagainstdirectlightningstrik es,appropriaterequirementsofNFPA

780shouldbeconsideredinadditiontoNEC.

3.ForCanada,appropriaterequire mentsoftheCEC22.1includingSection60andadditional

requirementsofCAN/CSA‐B72mustbeconsideredasapplicable.