Installation Guide

Table Of Contents

FinMInstallationGuide Release4.5.25 2‐19

TBSAntennas SiteInstallation

equaltotheradiusofthepole.Youwillthenhaveone“unit”thatyoucantaketo

thelocationonthepolewhereyouwanttomounttheantenna.(SeeFigure 2‐37

toFigure 2‐40formountingonathinpole)

4. Placethis“unit”onthepolewhereyouwanttomounttheantenna.Onceitisin

place,rotatethepoleclampasshown,thentightenbothbolts.

ThickPole

• ThismethodisformountingtheTBSantennaonapoleofpipesizelargerthan3in.

• Usewormdriveclamps(notsupplied),threadedthroughtheholesasshown.Thepole

clampisnotn

eeded.

Figure2‐41:ConnectPoleClamptoRadio

Holder

Figure2‐42:Tightenbolts

Figure2‐43:RotateClampandtightenbolts Figure2‐44:MountingKitonpole