Installation Guide

FinMInstallationGuide DQ0266070/A.01 2‐52
Grounding SiteInstallation
UnitsmustbeproperlygroundedtoaProtectiveGroundinaccordancewiththeLocal
ElectricalRegulations
• Rack‐moun tedequipmentshouldbemounte donlyingroundedracksandcabinets.
Further,youshould‐
• Alwaysmakethegroundconnectionfirstanddisconnectitlast
• Neverconnecttelecommunicationcablestoungroundedequipment
• Ensurethatallothercablesaredisconnectedbeforedisconnectingtheground
TBSandOSU
ThereisagroundinglugontheTBSandOSUasshowninFigure 2‐93.Grounditusing10AWG
wire.
Connecttheshieldoftheantennacoaxialcabletothegroundofthestructureinaccordance
with6.2gand6.2lofIEC60728‐11.
Figure2‐93:TBS/OSU:Groundingluglocation
TMU
ThegroundinglugfortheTMUisshowninFigure 2‐94.Grounditusing10AWGwire.
FOR REGULATORY REVIEW