Installation Guide

FinMInstallationGuide DQ0266070/A.01 2‐19
TBSAntennas SiteInstallation
equaltotheradiusofthepole.Youwillthenhaveone“unit”thatyoucantaketo
thelocationonthepolewhereyouwanttomounttheantenna.(SeeFigure 2‐37
toFigure 2‐40formountingonathinpole)
4. Placethis“unit”onthepolewhereyouwanttomounttheantenna.Onceitisin
place,rotatethepoleclampasshown,thentightenbothbolts.
ThickPole
• ThismethodisformountingtheTBSantennaonapoleofpipesizelargerthan3in.
• Usewormdriveclamps(notsupplied),threadedthroughtheholesasshown.Thepole
clampisnotneeded.
Figure2‐41:ConnectPoleClamptoRadio
Holder
Figure2‐42:Tightenbolts
Figure2‐43:RotateClampandtightenbolts Figure2‐44:MountingKitonpole
FOR REGULATORY REVIEW