Installation Guide

FinMInstallationGuide DQ0266070/A.01 2‐11
TBSMounting SiteInstallation
 
Figure2‐19:FastenTBStobaseplate(forhorizontalpole)
HoriztonalPole‐thin
1. Diameter3/4to11/2:BeforeraisingtheTBSonthepole,positionthepoleclampasshown
inthefollowingtwofigures.Donotcompletelytightenthebolts:
Thinpole(diameter3/4to11/2):Positionthepoleclampasshowninthefo llowin gtwofigures,donotcompletelytightenthebolts:
Figure2‐20:Thinpole:Fastenclamptobase
plate
Figure2‐21:Thinpole:Donotcompletely
tightenbolts
FOR REGULATORY REVIEW