Installation Guide

TVWhiteSpaceInstallationGuide Release1.0 2 ‐21
AlignSUUnit InstallationSteps
5. YouwillseetheblueActivatebuttonenabled.ClickittostarttheActivation
process.
6. Entertheparametersasrequestedinthewindowsthatappear,andclickNext
whenyouarereadytomovetothenextone.
7. Whenyouarefinished,clicktheActivatebutton.
8. Themainwindowwilldisplayabriefmessagesayingtheactionwascompleted
successfully,andafterafewmoments,theunitwillbeactivated.
2.17AlignSUUnit
1. MakesuretheHBSunitisactivated(checkwiththeNOC).
2. PointtheSUinthegeneraldirectionoftheHBSunit.
3. Accessthewebinterface(entertheunit’sIPaddressinawebbrowser)
4. Loginusingusernameadminandpasswordnetwireless.
5. Fromthemainwindow,youcanseetheRSS(radiosignalstrength)asagreenbar.
Whilereferringtothis,dothefollowing:
6. Swiveltheunit90
o
totherightslowly,180
o
totheleft,andthen90
o
backtowards
thebasestation.NoteatwhichpointtheRSSvalueismaximum.Locktheunitat
thispoint.
7. Preservingthehorizontalorientation,repeattheaboveinelevation.
8. Oncealignmentiscomplete,tightenthebolt.
FOR REGULATORY USES ONLY