Installation Guide

TVWhiteSpaceInstallationGuide Release1.0 2 ‐11
VerticalPole InstallationSteps
MediumPole
1. Diameter2to3:Positionthepoleclampasshowninthefollowingfigures.Donottighten
theboltsalltheway.
2. Placethis“unit”onthepolewhereyouwanttomountthedevice.Onceitisin
place,rotatethepoleclampasshown,thentightenbothbolts.
ThickPole
1. Diameterlargerthan3:Usewormdriveclamps(notsupplied),threadedthroughtheholes
asshown:
Figure2‐18:Mountingkitonathickpole
Thepoleclampisnotneeded.
Figure2‐14:ConnectPoleClamptoRadio
Holder
Figure2‐15:Tightenbolts
Figure2‐16:RotateClamp Figure2‐17:Completelytightenbolts
FOR REGULATORY USES ONLY