Installation Guide

TVWhiteSpaceInstallationGuide Release1.0 2 ‐10
VerticalPole InstallationSteps
2.8.2VerticalPole
Themountingkitcanbeusedonathin,medium,orthickpole.
ThinPole
1. Diameter3/4to11/2:Positionthepoleclampasshowninthefollowingfigures.
Donottightentheboltsalltheway.
2. Placethis“unit”onthepolewhereyouwanttomountthedevice.Onceitisin
place,rotatethepoleclampasshown,thentightenbothbolts.
ThinPole Dia.3/4‐11/2 page 2‐10
MediumPole Dia.2‐3 page 2‐11
ThickPole Dia.>3 page 2‐11
Figure2‐10:ConnectPoleClamptoRadio
Holder
Figure2‐11:Partiallytightenbolts
Figure2‐12:RotateClampandtightenbolts Figure2‐13:Completelytightenbolts
FOR REGULATORY USES ONLY