User manual

Accessible options:
No
- Traditional weighing
Yes
- Down-weighing mode
23.3. Checkweighing
In case of enabling the checkweighing mode, printouts are performed only
when a weighing is between MIN and MAX thresholds that have been
defined before.
Procedure:
• Enter parameters group < Working Modes> according to ch. 23
of this manual,
• Enter the required working mode and choose <
Checkweighing>
then set the required option.
Options:
No
- Every weighing is recorded
Yes
- Only weighings between MIN, MAX are recorded.
23.4. Tare mode
This function enables users to set parameters for tarring.
Procedure:
• Enter parameters group < Working Modes> according to ch. 23
of this manual,
• Enter the required working mode and choose <
Tare mode>
and then set the required option.
Options:
Single
- Basic tare mode. The set (chooden) tare value is
overwritten after entering a new value
72