User manual

21.3. Sound signal

Procedure:

• Enter < Others> according to ch. 21 of this manual, < Beep>

and set accordingly.

Settings:

None

- Sound for buttons and proximity sensors disabled

Buttons

- Sound for buttons enabled

Sensors

- Sound for proximity sensors enabled

All

- Sound for buttons and proximity sensors enabled

21.4. Cursor

In order to start working with a computer mouse enable parameter <Cursor>.

Procedure:

• Enter < Others> according to ch. 21 of this manual, choose

parameter <

Cursor> and set an option.

Settings:

- Cursor disabled

Yes

- Cursor enabled

21.5. Touch panel calibration

Touch panel calibration is required when inappropriate operation is

recognized. E.g. the reaction in a different place than the touching point.

Procedure:

• Enter submenu < Others> according to ch. 21 of this manual,

• Select <

Touch Screen Calibration> and then an editing field

appears,

• Using a thin and soft pointer press (keep pressed for some time)

in the point where the cross appears, after indicating the 4

place

confirm changes by pressing ENTER/PRINT.