User manual

• Inscribe LO and confirm by pressing .
14.5. Last digit
The last digit option < Last digit> is to switch off the last digit of
measured mass indication – the measurement is carried out with decreased
accuracy.
Procedure:
• Enter group of parameters <
Weighing> in accordance with ch. 14 of
this user manual, select parameter <
Last digit> and set its desired
value.
Accessible settings:
Always
- Last digit always visible
Never
- Last digit always switched off
When stable
- Last digit visible only on stable indication of mass
15. COMMUNICATION
The scale can communicate with external devices via different ports:
• COM 1 (RS232),
•
COM 2 (RS232),
•
Ethernet,
•
Tcp.
The communication can be configured in parameters’ group
<
Communication>.
In order to enter < Communication>, press and then:
„ Communication”.
37