User manual

You can also inscribe tare values to the product database. Every product has
a field “Tare”. In that case tare is automatically set to this value after selecting
the product.
Notice:
Tarring cannot be performer when a negative or zero value is being
displayed. In such case Err3 appears on the display.
13.4. Inscribing tare
It is possible to inscribe a tare value.
Procedure:
• While in any work mode press
, then the screen keyboard
is displayed,
• Inscribe tare and press
,
• The program returns to weighing and the and the display shows
the entered value with the „–” sign provided there was zero before
on the display.
13.5. Weighing for dual range scales
Switching between the I range and the II range happens automatically
(exceeding Max of the I range).
Weighings in the second range is signalled by a pictogram in the top left
corner of the display
. Then weighings is done with the accuracy
of the II range to the moment of returning to zero (autozero range
)
where the scale switches back to the I range.
Switching between the II range and I range is automatic both in the
switching point the autozero zone.
33