User manual

• Enter submenu < Databases> according to ch. 31 and then open
<
Controls>,
• Press button
, the program automatically starts saving the
database of controls,
Notice:
In case a pendrive is not recognized by the system after pressing
a message is displayed: <Operation failure>.
• After the operation is completed <Operation completed successfully>
is displayed together with a file name (with extention *.tdb) which has
been created on the pendrive,
Notice:
Names of created files comprise the database name and the factory
number of the scale, e.g. <Controls_239800.tdb>.
• Disconnect the pendrive from USB of the scale.
Notice:
The created file can be edited in program „ViewerKTP”. Description of
program „ViewerKTP” can be found in APPENDIX G of this manual.
31.6.3. Eksport the database of average tares
Procedure:
• Connect to USB of the scale a pendrive,
• Enter submenu <
Databases> according to ch. 31 and then open
database <
Average Tares>,
• Press button
, the program automatically starts saving the
database of controls,
Notice:
In case a pendrive is not recognized by the system after pressing
a message is displayed: <Operation failure>.
127