User manual

Caution:
1. To start testing a user with the authorization level at least
<operator>. If a logged on or anonymous operator has the
access level set to <None> the program after the try to start
testing will display: <Unauthorized access>.
2. The logging on procedure is described in ch. 11. The procedure
of outlining the authorization level is described in ch. 19 of this
manual.
• Choose the right product (button ) with properly inscribed
parameters of control:
CPG mode
Testing mode: Nondistractive Average Tare,
Nondistractive Empty-Full, Distructive Full-Empty,
Distructive Empty-Full
Charge
Number of the same type measerments in a serie (e.g.
charge=5 means 5 meadurement of tare and then five
gross measurements) : for ondistractive Empty-Full,
Distructive Full-Empty, Distructive Empty-Full
Mass
Product nominal mass
Tare
Package weight in calibration unit for: Nondistractive
Average Tare testing
Unit
Messurement unit for a product: [g] or [ml]
Density
Product density in [ml] (the range of accepted values
is 0.1g/cm
3
to 5g/cm
3
)
Notice:
The assortment database is described in ch. 31.7.2 of this manual.
• Set the general parameters of working mode <
Control of
packaged goods>> (see ch. 30.2),
• After returning to the main window in < Control of packaged
goods> press screen button
(start control) in the bottom part
of the display,
• The editing field for <Batch Number> with the screen keybord is
displayed,
• Inscribe the required batch number and confirm it by pressing
.
112