User manual

5.7. Checking the stored unit price
5.7.1. Press [PLU] key twice , the total price window will display
*1dc 1* (1 is goods number), the weight window display weight
and the unit price window display the unit price corresponding to the
goods number 1. There are two ways to check:
A. Keep pressing the [PLU] key, press the goods number once, the
total price window will add 1 and the unit price window displays the
unit price corresponding to the goods number each time. When the
goods number exceeds 99, it will back to 1 automatically.
B. Keep pressing and hold [PLU] key for 2 seconds to check the
stored unit prices quickly. At this time, the goods number in the
total price window will add 1 automatically and the unit price in the
unit price window will change according to the goods number.
When in unit price display, just loose [PLU] key to make a
checking.
5.7.2. Press [ENTER] key. the scale will back to normal weighing state
and display the unit price need to check.
5.8. Voltage saving function
When the scale is type of LED, it has the function of battery saving display
to prolong the working time of the battery, That means if the scale remains
zero for 5 seconds and if you don’t operate the keypad, the weight window
will display *0* and the total price window will display.
5.9. Overload warning
When the scale leaves factory, the overload warning value is set at the
point of Max. Capacity plus 9d(d is division value). When the weight of the
goods exceeds or is equal to the set value, the weight window of the scale
will display *
and the scale gives out a buzz sound.
- 9 -