User manual

8. CARE AND MAINTENANCE
8.1. To make sure the scale in good maintenance and avoid using it in
dust and trembling environment and put it under level state.
8.2. When weighing, put the load in the center of the scale as far as
possible.
8.3. Don’t wash the scale with corrosive impregnate.
8.4. The weight of the load should be less than the Max. Capacity +9d(
dis division value). If it exceeds the overload warning value, the
indicate will display *
and the scale will give out a buzz
sound.
8.5. Don’t put the heavy load on scale for a long time and don’t shock the
platform with heavy load, or the load cell may be damaged.
8.6. Be sure to insert the adapter to a quality power source.
8.7. When the scale doesn’t respond cut off all the power (AC and DC)
first, then connect power on it again.
8.8. When there is a malfunction, please cut off the power immediately
and pull out the plug.
8.9. Without authorization, never try to disassemble or repair the scales.
Send it to the service agent in local area or contact us immediately.
The calibration and simple rectifying methods are not open to users.
For details, please contact our sales agent in your country. Forbid to
change the setting data of trading scale without the permission of the
law !
- 13 -