User manual

Procedure:

• Enter < Devices> according to ch.14 of the manual,

• Choose „

Barcode Scanner / Code Length” then the screen

keyboard is displayed,

• Write a new length and confirm it by pressing

14.4. Transponder card reader

Depending on settings in PC software KTP NET, selecting (logging on) an

operator, after establishing connection with the computer, can be performed

by:

• Typing a password on a keyboard,

• Approaching a transponder card to the reader.

The card needs to be registered first.

Notice:

In case of problems with reading transponder cards check the submenu

Communication> and set appropriate baud rate (default 9600b/s).

14.4.1. Com port for transponder card readers

Procedure:

• Enter group of parameters < Devices> according to ch. 14

of this manual, select „

Transponder cards reader / Port”

and set appropriate option.

The scale can communicate with the reader via following ports:

• RS 232 (COM1),

• RS 232 (COM2).