User manual

Following settings are accessible for Ethernet:

• DHCP - Yes – No

• IP Address - 192.168.0.2

• Subnet Mask - 255.255.255.0

• Default gateway - 192.168.0.1

Notice:

The settings above are only for information purposes. Transmission

parameters should be matched to the local client network.

• Go back to weighing saving parameters and restart the device.

13.3. TCP protocol setting

TCP (Transmission Control Protocol) is a protocol for communication

between two computers. It operates in mode client-server. Server awaits

on connection initiation on a specified port while client initiates connection

to the server. Scale software allows setting the port for the „Tcp” protocol.

Procedure:

• Enter < Communication> parameter group as described

in chapter 13 of the manual,

• Select: „

Tcp / Port” then you will see window <Port>

with the screen keyboard,

• Enter the required number and press

14. DEVICES

14.1. Computer

Scales can cooperate with PC software KTP NET. In submenu

Computer> some settings needs to be configured for cooperation

with computers.

Enter submenu < Computer>, press and then:

„ Devices / Computer”.