User manual

• After about 2 minuts a weighing result appears on the display
additionally accompanied by a beep sound lasting for about 2
secunds.
• After the stabilization process the comparator performs a measurement
in mode „Automatic first stable”. (pictogram
appears).
• After getting the first stable result the procedure command changes
form <Put A1> to <Put B1>,
• Unload weight “A” - “-----“ are shown for stabilization process,
• The stabilization proces last about 2 minuts again, then „0” appears
on the display – the comparator is ready for weighing another weight,
• Load weight “B”. on the pan and the device enters the stabilization
process showing “-----“,
• After about 2 minuts a weighing result appears on the display
additionally accompanied by a beep sound lasting for about 2
sekunds.
• After the stabilization process the comparator performs a measurement
in mode „Automatic first stable”. (pictogram
appears).
• After getting the first stable result the procedure command changes
form <Put B1> to <Put B2>,
• Unload weight “B” - “-----“ are shown for stabilization process,
• The stabilization proces last about 2 minuts again, then „0” appears
on the display – the comparator is ready for weighing another weight,
• Load againg standard weight “B” and the device enters the stabilization
process showing “-----“,
• After about 2 minuts a weighing result appears on the display
additionally accompanied by a beep sound lasting for about
2 sekunds,
• After the stabilization process the comparator performs a measurement
in mode „Automatic first stable”. (pictogram
appears),
• After getting the first stable result the procedure command changes
form <Put B2> to <Put A2>,
• Unload weight “B” - “-----“ are shown for stabilization process,
• The stabilization proces stabilizacji last about 2 minuts again, then „0”
appears on the display – the comparator is ready for weighing another
weight,
83