User manual

5. After about 2 minuts a weighing result appears on the display
additionally accompanied by a beep sound lasting for about 2 secunds.
6. After the stabilization process the comparator performs a measurement
in mode „Automatic first stable”.
7. After getting the first measurement unload the pan taking off the weight
“A”. Then indication returns to “-----“– the measurement system is
again in the stabilization process.
8. The stabilization proces last about 2 minuts again, then „0” appears
on the display – the comparator is ready for weighing another weight.
9. Load the pan with another weight and then “-----“ appears on the
display. The device is again in stabilization process.
10. After about 2 minuts a weighing result appears on the display
additionally accompanied by a beep sound lasting for about 2
sekunds.The further procedure is the same as at the beginning
of first stage.
11. After the procedure is completed the comparator needs about
2 minuts for stabilization before a next comparison is begun.
A procedure description on the basis of ABBA method
• Start the test by pressing screen button (procedure start) in the
bottom line,
• The following information are going to be displayed in the workspace:
Put A1-1
- Command concerning proceeding
P 1/10
- Measurement series : 1 –series in progress number,
10 – number of measurement series to perform
DX=0
- The average difference of indications
S=0
- Standard deviation
Notice:
Users can terminate the procedure anytime after pressing screen button
(procedure stop) in the bottom line. During the procedure other
screen buttons, function keys,
and are locked.
• Put standard “A” on the pan and the device enters the stabilization
process showing “-----“.
82