User manual

23. WORK MODE - WEIGHING

The < Weighing> mode is the standard working mode allowing

to perform weighings and saving them in the database

Weighings / Alibi>.

23.1. Starting the working mode

The < Weighing> mode is the standard working mode. If a user has

changed the operating mode to another follow the actions below:

• While in the main window press the icon with mode name placed on

the top bar on the left then submenu comprising all accessible working

modes <Working Modes> opens,

• Choose <

Weighing>, program automatically returns to the main

window displaying icon

in the top bar.

24. WORKING MODES – COUNTING PIECES

Counting pieces is work mode allowing to count pieces on the basis

of the standard unit mass of a single piece set on the scale or fetched

from the database.

Notice:

If counting pieces is performed in an additional container it should be tarred.

24.1. Starting the working mode

Procedure:

• While in the main window press in the top bar, then you will

see a submenu <Working Modes> comprising a list of modes,

• Choose < Counting Pieces>, program automatically returns

to the main window displaying icon

in the top bar,