User manual

By default setting button is accessible in the bottom part of the
display but activating the button
can be done in subm
„
enu:
Parameters / Display / Actions”
(see ch. 17.2 of the manual).
For automatic printout of cumulative labels counters and total mass
variables are always zeroed.
• Confirm the changes by pressing and go to parameter
<
Threshold> then <Threshold> window appears with the screen
keyboard,
• Set the appropriate value for automatic triggering cumulative labels:
− If parameter < Mode> is set to <Mass> then enter the required
value of total mass to exceed in order to print the C label,
− If parameter < Mode> is set to <Number> use the screen
keyboard to enter the required counter value as a threshold to
trigger off printing C labels.
• Confirm the changes introduced by pressing .
22.5.5. Automatic triggering cumulative labels of cumulative labels
Users have access to the function of automatic triggering of printing
cumulative labels of cumulative labels after setting parameters
<
Mode> and < Threshold>.
Procedure:
• Enter < Working modes> parameter group as described
in chapter 22 of the manual,
• Enter the required working mode and choose: „
Labelling mode /
CC label automatic triggering / Mode” and then set the
required option:
69