User manual

22.3. Checkweighing

In case of enabling the checkweighing mode, printouts are performed only

when a weighing is between MIN and MAX thresholds that have been

defined before.

Procedure:

• Enter parameters group < Working Modes> according to ch. 22

of this manual,

• Enter the required working mode and choose <

Checkweighing>

then set the required option.

Options:

- Every weighing is recorded

Yes

- Only weighings between MIN, MAX are recorded.

22.4. Tare mode

This function enables users to set parameters for tarring.

Procedure:

• Enter parameters group < Working Modes> according to ch. 22

of this manual,

• Enter the required working mode and choose <

Tare mode>

and then set the required option.

Options:

Single

- Basic tare mode. The set (chooden) tare value

is overwritten after entering a new value.

Current sum

- Summing up tare values of product and package

together with manually inscribed tare. After next

setting of product or package tare the entered

tare value is disabled.