User manual

2. The change in on mode results in the same change for other working

modes working modes.

22.1. Recording mode

Depending on setting parameter < Save Mode> users can send data

from the scale to an external device.

Procedure:

• Enter parameters group <

Working modes> according

to ch. 22 of this manual,

• Enter the required mode and choose <

Save Mode> then choose

the required mode.

Accessible options:

• Manual every stable,

• Manual first stable,

• Automatic first stable,

• Automatic last stable.

22.2. Down-weighing

Software allows to weigh in the “down-weighing” mode. It consist in putting

the load on the pan and taking off/removing portions of it with concurrent

saving weighings equal to the portions taken off the pan.

Procedure:

• Enter parameters group <

Working Modes> according

to ch. 22 of this manual,

• Enter the required working mode and choose <

Down-weighing>

and then set the required option.

Accessible options:

- Traditional weighing

Yes

- Down-weighing mode