User manual

• Go back to weighing saving parameters and restart the device.
15.3. TCP protocol setting
TCP (Transmission Control Protocol) is a protocol for communication
between two computers. It operates in mode client-server. Server awaits
on connection iniciation on a specified port while client initiates connection
to the server. Scale software allows setting the port for the „Tcp” protocol.
Procedure:
• Enter < Communication> parameter group as described
in chapter 16 of the manual,
• Select: „
Tcp / Port” then you will see window <Port>
with the screen keyboard,
• Enter the required number and press
.
16. DEVICES
16.1. Computer
The scale can cooperate with a computer. Active connection scale-computer
is signalled by icon
in the top bar of the main window. In submenu
<
Computer> some settings needs to be configured for cooperation
with computers.
Enter submenu < Computer>, press and then:
„ Devices / Computer”.
16.1.1. Computer port
Procedure:
• Enter parameters’ group < Devices> according to ch.
16 of this manual, select „
Computer / Port” and then
set the appropriate option.
37