User manual

13. WEIGHING
Put a load on the weight pan. When pictogram
is displayed the
indication is ready to read.
Notice:
A weighing can be saved after stabilising a measurement over zero
(pictogram
).
13.1. Conditions of operational use
In order to assure a long term operating period with appropriate
measurements following principles should be adhered to:
• Avoid applying mechanical shocks to the weight pan:
• Loads should be placed in the centre of the pan (eccentric errors
are outlined in PN-EN 45501 chapter 3.5 and 3.6.2):
• Do not apply concentrated forces (all load in one point):
30