User manual

24.8. Dosing
Standard indicators are equipped with signalling fields and internal circuit
of - 3 optoinsulated inputs (5÷24V DC), 3 optoinsulated reed relay outputs.
Caution:
Working mode „Dosing” does not support continuous printouts.
24.8.1. Dosing mode setting
Users can chose one of three different modes <P7.4.1 DOSING NAM.>.
Procedure:
• Enter <P7 WORK MODES> and then:
DOSE. MODE 1
- manual operation (after pressing
),
DOSE. MODE 2
- automatic operation,
DOSE. MODE 3
- „-” negative dosing (after tarring
and pressing ).
Return to weighing:
See 11.3.
- 110 -