Instruction Manual

• In the overlap <Transmission setting>:
− Set the communication type „Ethernet Transmission TCP”,
− „IP address 1” the same as <P2.4.2 IP ADDRESS> in the scale,
− „Port”/”Com” the same as <P2.4.5 LOCAL PORT> in the scale,
• Confirm the changes by clicking ,
• Rerun the program,
• Press the „Connect” button,
• The appropriate communication with scales is signalled by pictogram
in the left part of the display,
• Transmission problems are signalled by the message window:
32.3. Creating and downloading label patterns to the terminal memory
The software EDYTOR ETYKIET R02 is used to design labels. Save the
label a file with „lb” extension. Then download it to the terminal memory
using EDYTOR WPW software.
Notice:
Installation files of softwares EDYTOR ETYKIET R02 and EDYTOR WPW
can be downloaded from our website: www.radwag.com. in: Products /
Measuring indicators / PUE C41H.
Example:
Lets make and send following example of label into a terminal:
- 173 -