Instruction Manual

24.8.5. Setting „N2” counter
Procedure:
• Enter <P7 WORK MODES> according to 11.2. and then:
• Inscribe N2 value to be exceeded for triggering cc label,
• Confirm it with
.
Return to weighing:
See 11.3.
24.8.6. Setting „M2” number of pieces
Procedure:
• Enter <P7 WORK MODES> according to 11.2. and then:
• Inscribe M2 value to be exceeded for triggering cc label,
• Confirm it with
.
Return to weighing:
See 11.3.
- 117 -