User manual

2. PRECAUTIONS
2.1. Maintenance
A. Please, read carefully this user manual before and use the device
according to its intended use.
B. Dead batteries (accumulators) should be utilized according to the law;
C. Devices that are to be withdrawn from usage should be sent back to
the producer or in case of own utilization do it according to the law.
In case of an elongated storage period in low
temperatures, it is not allowed the full discharge
of the accompanied batteries.
2.2. Power supply
Indicators in plastic casing are intended to be supplied from a power
adapter or from NiMH rechargeable battery pack (standard equipment).
New rechargeable batteries should be formatted according to the
description in the chapter 14.4.4. of this manual.
If you want to use normal batteries instead of rechargeable ones,
proceed as follows:
x Before installing non-rechargeable batteries turn on the device
and set <5.5.CHr6> to <no>, to switch off charging.
x Then install the batteries.
- 6 -
Installing batteries without changing <5.5.CHr6> to <no>
may cause damage of batteries and the indicator.
2.3. Operation in a strong electrostatic field
If the device is about to operate in a strong electrostatic field
(e.g. printing houses etc.) it should be connected to the earthing.
Connect it to the clamp terminal signed
.