Instruction Manual

ManualsBrandsRADWAG ManualsScalesTMX 6/15/H2 Multifunctional Scales

Table Of Contents

1. INTENDED USE
2. PRECAUTIONS
3. WARRANTY CONDITIONS
4. MAIN DIMENSIONS
5. DESCRIPTON OF CONNECTORS
6. UNPACKING AND ASSEMBLY
7. GETTING STARTED
8. LOGGING ON
9. SCALE WINDOW DISPLAY
- 9.1. View
- 9.2. Buttons’ functions
10. WEIGHING PROCEDURE
- 10.1. Tarring
- 10.2. Hand operated tare value entering
- 10.3. Zeroing of scale
- 10.4. Weighing on two range scales
11. WINDOW NAVIGATION
12. PRODUCT CHOICE
- 12.1. Choosing a product by name
- 12.2. Choosing a product by code
13. CHOICE OF A CONTRACTOR
- 13.1. Contractor choosing by name
- 13.2. Contractor choosing by code
14. CHOOSING A PACKING
- 14.1. Choosing a packing by name
- 14.2. Choosing a packing by code
15. STORE CHOOSING
16. LOT CHOOSING
17. LOT 2 CHOOSING
18. QUANTITY NUMBER CHOOSING
19. DATABASES
- 19.1. Access to databases edition
- 19.2. Operators’ database
- 19.3. Base of products
- 19.4. Contractors’ base
- 19.5. Base of packages
20. COUNTING PIECES
- 20.1. Enabling working mode
- 20.2. Setting reference unit mass
21. TRANSACTIONS
- 21.1. Starting working mode
- 21.2. Starting a transaction
- 21.3. Continuing a transaction
22. STATISTICS
23. WEIGHING RECORDING
24. PROGRAMMABLE BUTTONS
25. LOGGING OFF
- 25.1. Logging off
- 25.2. Change-logging
- 25.3. Switching off a terminal
26. CHECKWEIGHING THRESHOLDS
27. PROGRAM’S OPTIONS
- 27.1. Weighing parameters
- 27.2. Operators
- 27.3. Devices
- 27.4. Reports
- 27.5. Others
- 27.6. Alibi
  - 27.6.4. Filter
- 27.7. IN/OUT configuration
  - 27.7.1. Inputs configuration
  - 27.7.2. Outputs configuration
29. WEIGHING PARAMETRES SETTING
- 29.1. Weighing Server program starting
- 29.2. List of software menu
- 29.3. Parameters of scale software
  - 29.3.1. Readout of parameters
  - 29.3.2. Save changes procedure
- 29.4. Setting a filtering level
- 29.5. Median filter
- 29.6. Autozero function
- 29.7. Scale software settings
- 29.8. Closing WeighingServer program
30. ERROR MESSAGES
31. LABEL DESIGNING
- 31.1. Label pattern making
- 31.2. Inventory of variables:
32. DIAGRAMS OF CONNECTION CABLES
- 32.1. USB cable (adapter)
- 32.2. USB printer cable
- 32.3. RS232 printer cable
- 32.4. Ethernet cable
- 32.5. RS232 terminal – computer cable
- 32.6. RS232, RS485 cable – colours
- 32.7. RS232C cable – colours
33. CONNECTORS
- 33.1. RS232, RS485 connector
- 33.2. Ethernet connector
- 33.3. USB connector
- 33.4. RS232C connector
34. SPECIFICATION OF ADDITIONAL MODULES
- 34.1. Weighing module MW-02
- 34.2. Additional 8 inputs / 8 outputs module
- 34.3. WE 4 - 4 inputs / 4 outputs module
- 34.4. Analogue output module AN series
- 34.5. Profibus interface DP V1
35. ADDITIONAL EQUIPMENT
36. TECHNICAL PARAMETERS
37. APPENDIX A – SETTING A BARCODE SCANNER

6. UNPACKING AND ASSEMBLY

A. Remove the scale from the packaging,

B. Place the scale on even and hard surface far from heat sources,

C. Scale should be levelled by turning levelling foot. Levelling is

correct if air bubble is in central position of level indicator located

on scale’s base.

7. GETTING STARTED

• Turn on the scale pressing the ON/OFF switch on the back side

of the terminal. Then Windows loading will start.

• After the starting procedure, the main window of TERMINAL E2

EWIDENCJA application will be displayed automatically.

Notice:

The main programme’s window view can be changed by choosing suitable

setting options.

- 9 -