Instruction Manual
Table Of Contents
- 1. INTENDED USE
- 2. PRECAUTIONS
- 3. WARRANTY CONDITIONS
- 4. MAIN DIMENSIONS
- 5. DESCRIPTON OF CONNECTORS
- 6. UNPACKING AND ASSEMBLY
- 7. GETTING STARTED
- 8. LOGGING ON
- 9. SCALE WINDOW DISPLAY
- 10. WEIGHING PROCEDURE
- 11. WINDOW NAVIGATION
- 12. PRODUCT CHOICE
- 13. CHOICE OF A CONTRACTOR
- 14. CHOOSING A PACKING
- 15. STORE CHOOSING
- 16. LOT CHOOSING
- 17. LOT 2 CHOOSING
- 18. QUANTITY NUMBER CHOOSING
- 19. DATABASES
- 20. COUNTING PIECES
- 21. TRANSACTIONS
- 22. STATISTICS
- 23. WEIGHING RECORDING
- 24. PROGRAMMABLE BUTTONS
- 25. LOGGING OFF
- 26. CHECKWEIGHING THRESHOLDS
- 27. PROGRAM’S OPTIONS
- 29. WEIGHING PARAMETRES SETTING
- 30. ERROR MESSAGES
- 31. LABEL DESIGNING
- 32. DIAGRAMS OF CONNECTION CABLES
- 33. CONNECTORS
- 34. SPECIFICATION OF ADDITIONAL MODULES
- 35. ADDITIONAL EQUIPMENT
- 36. TECHNICAL PARAMETERS
- 37. APPENDIX A – SETTING A BARCODE SCANNER
OUTPUT MODE THRESHOLD
STATE OF
MASS
Dosing
rough
Dosing
accurate
1
0 - MIN
1 1
Threshold 1,2 to MIN
Threshold 2 to MAX
2 MIN- MAX 0 1
1
0 - MIN
1 0
Threshold 1 to MIN
Threshold 1,2 to MAX
2
MIN- MAX
1 1
1
0 - MIN
1 0
Threshold 1 to MIN
Threshold 2 to MAX
2
MIN- MAX
0 1
1 0 - MIN 0 0
2 MIN- MAX 1 0
0
Threshold 1 from MIN
Threshold 1,2 from MAX
3
> MAX
1 1
1
0 - MIN
0 0
2 MIN- MAX 1 0
0
Threshold 1 from MIN
Threshold 2 from MAX
3 > MAX 0 1
CAUTION !
In the case of mode 3 release trigger outputs to turn off the third fret on the
threshold dose MAX. Dosing process will be activated only when the mass
reaches the platform MIN.
Thresholds can be attributed only to go free. In the case of occupied disable
all the outputs assigned functions at the point 27.7.2
After making changes to output mode, the new functionality will be allocated
only to the newly selected item from the main program window. Select the
product to test out.
- 68 -