Instruction Manual

ManualsBrandsRADWAG ManualsScalesTMX 6/15/H2 Multifunctional Scales

Table Of Contents

1. INTENDED USE
2. PRECAUTIONS
3. WARRANTY CONDITIONS
4. MAIN DIMENSIONS
5. DESCRIPTON OF CONNECTORS
6. UNPACKING AND ASSEMBLY
7. GETTING STARTED
8. LOGGING ON
9. SCALE WINDOW DISPLAY
- 9.1. View
- 9.2. Buttons’ functions
10. WEIGHING PROCEDURE
- 10.1. Tarring
- 10.2. Hand operated tare value entering
- 10.3. Zeroing of scale
- 10.4. Weighing on two range scales
11. WINDOW NAVIGATION
12. PRODUCT CHOICE
- 12.1. Choosing a product by name
- 12.2. Choosing a product by code
13. CHOICE OF A CONTRACTOR
- 13.1. Contractor choosing by name
- 13.2. Contractor choosing by code
14. CHOOSING A PACKING
- 14.1. Choosing a packing by name
- 14.2. Choosing a packing by code
15. STORE CHOOSING
16. LOT CHOOSING
17. LOT 2 CHOOSING
18. QUANTITY NUMBER CHOOSING
19. DATABASES
- 19.1. Access to databases edition
- 19.2. Operators’ database
- 19.3. Base of products
- 19.4. Contractors’ base
- 19.5. Base of packages
20. COUNTING PIECES
- 20.1. Enabling working mode
- 20.2. Setting reference unit mass
21. TRANSACTIONS
- 21.1. Starting working mode
- 21.2. Starting a transaction
- 21.3. Continuing a transaction
22. STATISTICS
23. WEIGHING RECORDING
24. PROGRAMMABLE BUTTONS
25. LOGGING OFF
- 25.1. Logging off
- 25.2. Change-logging
- 25.3. Switching off a terminal
26. CHECKWEIGHING THRESHOLDS
27. PROGRAM’S OPTIONS
- 27.1. Weighing parameters
- 27.2. Operators
- 27.3. Devices
- 27.4. Reports
- 27.5. Others
- 27.6. Alibi
  - 27.6.4. Filter
- 27.7. IN/OUT configuration
  - 27.7.1. Inputs configuration
  - 27.7.2. Outputs configuration
29. WEIGHING PARAMETRES SETTING
- 29.1. Weighing Server program starting
- 29.2. List of software menu
- 29.3. Parameters of scale software
  - 29.3.1. Readout of parameters
  - 29.3.2. Save changes procedure
- 29.4. Setting a filtering level
- 29.5. Median filter
- 29.6. Autozero function
- 29.7. Scale software settings
- 29.8. Closing WeighingServer program
30. ERROR MESSAGES
31. LABEL DESIGNING
- 31.1. Label pattern making
- 31.2. Inventory of variables:
32. DIAGRAMS OF CONNECTION CABLES
- 32.1. USB cable (adapter)
- 32.2. USB printer cable
- 32.3. RS232 printer cable
- 32.4. Ethernet cable
- 32.5. RS232 terminal – computer cable
- 32.6. RS232, RS485 cable – colours
- 32.7. RS232C cable – colours
33. CONNECTORS
- 33.1. RS232, RS485 connector
- 33.2. Ethernet connector
- 33.3. USB connector
- 33.4. RS232C connector
34. SPECIFICATION OF ADDITIONAL MODULES
- 34.1. Weighing module MW-02
- 34.2. Additional 8 inputs / 8 outputs module
- 34.3. WE 4 - 4 inputs / 4 outputs module
- 34.4. Analogue output module AN series
- 34.5. Profibus interface DP V1
35. ADDITIONAL EQUIPMENT
36. TECHNICAL PARAMETERS
37. APPENDIX A – SETTING A BARCODE SCANNER

26. CHECKWEIGHING THRESHOLDS

In the main program’s window user can see checkweighing thresholds’

results (MIN,MAX) in a bar chart

Checkweighing thresholds data is taken from database of a product or

programmed with function buttons described in point 27.5.2 of the manual.

27. PROGRAM’S OPTIONS

Procedure:

• In order to enter program’s options, user with administrator’s or

advanced authority must be logged on.

• Press

in program’s main window,

• Press:

in log off operator window ,

CAUTION!

Changes made in the options must be approved in the main window by

button options

27.1. Weighing parameters

Setting up basic weighing parameters.

Procedure:

• Enter program’s options according to

point 27 of the manual, then press:

- 55 -