Instruction Manual

ManualsBrandsRADWAG ManualsScalesTMX 6/15/H2 Multifunctional Scales

Table Of Contents

1. INTENDED USE
2. PRECAUTIONS
3. WARRANTY CONDITIONS
4. MAIN DIMENSIONS
5. DESCRIPTON OF CONNECTORS
6. UNPACKING AND ASSEMBLY
7. GETTING STARTED
8. LOGGING ON
9. SCALE WINDOW DISPLAY
- 9.1. View
- 9.2. Buttons’ functions
10. WEIGHING PROCEDURE
- 10.1. Tarring
- 10.2. Hand operated tare value entering
- 10.3. Zeroing of scale
- 10.4. Weighing on two range scales
11. WINDOW NAVIGATION
12. PRODUCT CHOICE
- 12.1. Choosing a product by name
- 12.2. Choosing a product by code
13. CHOICE OF A CONTRACTOR
- 13.1. Contractor choosing by name
- 13.2. Contractor choosing by code
14. CHOOSING A PACKING
- 14.1. Choosing a packing by name
- 14.2. Choosing a packing by code
15. STORE CHOOSING
16. LOT CHOOSING
17. LOT 2 CHOOSING
18. QUANTITY NUMBER CHOOSING
19. DATABASES
- 19.1. Access to databases edition
- 19.2. Operators’ database
- 19.3. Base of products
- 19.4. Contractors’ base
- 19.5. Base of packages
20. COUNTING PIECES
- 20.1. Enabling working mode
- 20.2. Setting reference unit mass
21. TRANSACTIONS
- 21.1. Starting working mode
- 21.2. Starting a transaction
- 21.3. Continuing a transaction
22. STATISTICS
23. WEIGHING RECORDING
24. PROGRAMMABLE BUTTONS
25. LOGGING OFF
- 25.1. Logging off
- 25.2. Change-logging
- 25.3. Switching off a terminal
26. CHECKWEIGHING THRESHOLDS
27. PROGRAM’S OPTIONS
- 27.1. Weighing parameters
- 27.2. Operators
- 27.3. Devices
- 27.4. Reports
- 27.5. Others
- 27.6. Alibi
  - 27.6.4. Filter
- 27.7. IN/OUT configuration
  - 27.7.1. Inputs configuration
  - 27.7.2. Outputs configuration
29. WEIGHING PARAMETRES SETTING
- 29.1. Weighing Server program starting
- 29.2. List of software menu
- 29.3. Parameters of scale software
  - 29.3.1. Readout of parameters
  - 29.3.2. Save changes procedure
- 29.4. Setting a filtering level
- 29.5. Median filter
- 29.6. Autozero function
- 29.7. Scale software settings
- 29.8. Closing WeighingServer program
30. ERROR MESSAGES
31. LABEL DESIGNING
- 31.1. Label pattern making
- 31.2. Inventory of variables:
32. DIAGRAMS OF CONNECTION CABLES
- 32.1. USB cable (adapter)
- 32.2. USB printer cable
- 32.3. RS232 printer cable
- 32.4. Ethernet cable
- 32.5. RS232 terminal – computer cable
- 32.6. RS232, RS485 cable – colours
- 32.7. RS232C cable – colours
33. CONNECTORS
- 33.1. RS232, RS485 connector
- 33.2. Ethernet connector
- 33.3. USB connector
- 33.4. RS232C connector
34. SPECIFICATION OF ADDITIONAL MODULES
- 34.1. Weighing module MW-02
- 34.2. Additional 8 inputs / 8 outputs module
- 34.3. WE 4 - 4 inputs / 4 outputs module
- 34.4. Analogue output module AN series
- 34.5. Profibus interface DP V1
35. ADDITIONAL EQUIPMENT
36. TECHNICAL PARAMETERS
37. APPENDIX A – SETTING A BARCODE SCANNER

complete the fields according to point 19.5.1 of the manual.

• In order to accept changes, press:

• In order to refuse changes, press:

19.5.3. Eliminating a packing

Procedure:

• Using choosing a packing by name button in the main program

window, enter packages base, choose a packing to be eliminated

and, according to point 19.1 of the manual, press:

chosen packing will be eliminated from database.

20. COUNTING PIECES

Standard software in weighing terminals PUE5 comprises an additional

working mode – counting pieces. The database of weighings holds

measurements in pieces of the same weight. If counting pieces is

performed in an additional container it needs to be tarred before

putting counting pieces into it.

20.1. Enabling working mode

Procedure:

• While in the main window press ,

• While in the operator logout window press

• Then press in sequence buttons:

- 43 -