Instruction Manual
Table Of Contents
- 1. INTENDED USE
- 2. PRECAUTIONS
- 3. WARRANTY CONDITIONS
- 4. MAIN DIMENSIONS
- 5. DESCRIPTON OF CONNECTORS
- 6. UNPACKING AND ASSEMBLY
- 7. GETTING STARTED
- 8. LOGGING ON
- 9. SCALE WINDOW DISPLAY
- 10. WEIGHING PROCEDURE
- 11. WINDOW NAVIGATION
- 12. PRODUCT CHOICE
- 13. CHOICE OF A CONTRACTOR
- 14. CHOOSING A PACKING
- 15. STORE CHOOSING
- 16. LOT CHOOSING
- 17. LOT 2 CHOOSING
- 18. QUANTITY NUMBER CHOOSING
- 19. DATABASES
- 20. COUNTING PIECES
- 21. TRANSACTIONS
- 22. STATISTICS
- 23. WEIGHING RECORDING
- 24. PROGRAMMABLE BUTTONS
- 25. LOGGING OFF
- 26. CHECKWEIGHING THRESHOLDS
- 27. PROGRAM’S OPTIONS
- 29. WEIGHING PARAMETRES SETTING
- 30. ERROR MESSAGES
- 31. LABEL DESIGNING
- 32. DIAGRAMS OF CONNECTION CABLES
- 33. CONNECTORS
- 34. SPECIFICATION OF ADDITIONAL MODULES
- 35. ADDITIONAL EQUIPMENT
- 36. TECHNICAL PARAMETERS
- 37. APPENDIX A – SETTING A BARCODE SCANNER
34.5. Profibus interface DP V1
Profibus Plug-In Module
PUE5 weighing terminals can be optionally equipped in Profibus Plug-In
Modules of DPV1 standard with connectivity via the uniform Anybus-
CompactCom. A detailed description of the interface is in a separate
manual Profibus PUE5.
34.5.1. Technical specification
Size 52mm x 50mm x 22mm
Power Supply 3,3 V DC
Temperature -10 do +40°C
BUS Baud Rate Auto Baud Rate
I/O Input 244 bytes(Max 368 bytes IN+OUT)
I/O Output 244 bytes (Max 368 bytes IN+OUT)
Appl Interface serial
Internal baud rates
19.2; 57.6; 115.2; 625 kbps (internal
DIP SWITCH)
Baud Rate Error ±1.5%
34.5.2. Colours of wires
A Green
B Red
34.5.3. The way of installing inside PUE 5
These modules are intended to mount inside PUE 5. They need to be
connected to the J9. There is a gland installed on the back wall of the
housing. A 3-meter shielded cables are led via the gland. Remove
insulation from wires.
- 130 -