Instruction Manual

12. Using keyboard enter variable in <Codebar value> space {52}.
13. Accept changes with and put a code in appropriate label
place.
14. Save ready label pattern choosing <File>, then <Save as…> lab.
15. Set up a label in Terminal E2R Evidence application as instructed in
point 27.3.2. of the manual.
Caution:
Saved label pattern with*.lb extension is not editable file. Therefore
additional label pattern recording with *.lab extension is recommended
(program’s menu: File/ Save as…) in order to enable future label
pattern modification.
31.2. Inventory of variables:
The list of all variables accessible in the system for defining label patterns in
program Terminal E2R Ewidencja from version 1.1.6.118
Symbol Description
{2} Date
{3} Time
{4} Date and time
{6} Net mass in the current unit
{7} Net mass in calibration unit
{8} Gross mass
{9} Tare
{10} Current unit
{11} Calibration unit
{12} Minimum threshold
{13} Maximum threshold
{14} Batch number
{25} Hex
{26} HexToUTF8
{27} Net value
{30} Gross value
- 111 -